Composite Hose Installation Rules or Guide

Composite Hose Installation Rules or Guide

A wide range of composite hoses cover various applications. This could be to carry chemical vapor recovery and mineral oils and acids. Rugged, lightweight design and flexibility make the composite hoses easy to use. However if customers cannot use correctly, they will be damaged in the daily use. In order to give customers a better knowledge of composite hose installation therefore we offer composite hose guides to achieve the best results.

Composite hose should not be used unsupported

Never use hose unsupported

Composite hose should be used supported

Always support hose near couplin

It’s not correct to keep your composite hose from touching with sharp edges. If it is necessary you should use soft material supporting.

Composite hose should not hang in the air

Hose cannot hang in the air

Composite hose should be used supported near coupling

Support composite hose near coupling

In the above picture we can see the composite hose is excessive sagging. And it’s the wrong operation.
To avoid excessive sagging of composite hoses, we should use a hanging support in the middle of the hoses to keep balance.

Avoid excessive sagging of composite hose

Avoid excessive sagging

Use a hanging support to avoid composite hose excessive sagging

Using support to avoid excessive sagging

In the above picture we can see the composite hose is excessive sagging. And it’s the wrong operation.
To avoid excessive sagging of composite hoses, we should use a hanging support in the middle of the hoses to keep balance.

Avoid composite hose excessive bending

Composite hose bends excessively

Use a pipe bend near the valve to avoid composite hose excessive bending

Using a pipe bend to avoid excessive bend

The composite hose should not excessive bend. We can use a pipe bend near the valve to avoid composite hose excessive bending.

The wrong way of lifting composite hose

Composite hose is abrasion coating damaged

Use a nylon sling belt to prevent composite hose abrasion coating

Using a nylon sling belt when lifting hose

Customers can not lift the composite hose using only a rope because the action will damage the abrasion coating.

Composite hose should not sag between the quay and the ship’s side

Composite hose sags between sides of the quay and the ship

Composite hose bending radius should not exceed the permissible value.

Composite hose supported by using slings and other overhead supports

Request a Quote Form